How to Connect Silhouette CAMEO plotter with TIA Creation Mobile Skin Software
In this tutorial we are going to tell you how you are connect your Silhouette CAMEO plotter with TIA Creation Mobile and Laptop Skin Making Software
Step 1 : Open Control Penal
Step 2 : Go to View devices and printers
Step 3: Check CAMEO plotter is properly connected with your system
Step 4 : After Connection is done you need to add a printer
Step 5 : After Click on Add a printer, Add a device dialog box open, Click on The printer that I want isn't listed
Step 6 : Select Add a local printer or network printer with manual settings and click next
Step 7 : CAMEO plotter always work on usb support so you need to sellect usb port which is your plotter connected and click next
If your system display multiple usb port then select any one port and next
Step 8 : Install the printer driver
You need to select Manudacturer is Generic and Printer is Generic / Text Only and click next
Step 9 : Which verion of driver do you want to use?
in this saction you need to select Use the driver that is currently installed
Do not select Replace the current driver and click next.
Step 10 : Type a printer name
This is most important thing is setup
You must use printer name is CAMEO
if you are useing different name of printer then TIA Creation Mobile Skin making Software not work properly with your CAMEO ploter
so Make sure you are write name of plotter is CAMEO and click next
Step 11 : Do not share this printer
Step 12 : Finish
NOW YOUR CAMEO PLOTTER SETUP DONE AND READY TO CONNECT WITH MOBILE SKIN AND LAPTOP SKIN MAKING
BUT YOU NEED TO CHECK YOUR USB PORT WHICH YOU SELECT IN STEP 7 IS WORKING PROPERLY OR NOT
SO BELOW IS GUIDE HOW YOU CHECK YOUR USB PORT AND CAMEO PLOTTER IS CONNECT OR YOU NEED TO CHANGE USB PORT AND IF NEEC TO CHANGE USB PORT THEN HOW TO CHANGE IT
Right Click on CAMEO printer and go to Printer properties
Click on Print Test Page
After you Click on Print Test Page you seen some head movement in your CAMEO plotter and also print file processed it not give any error and your CAMEO plotter connected sucsessfuly.
if your usb port is wrong when test print gives error to you
then click on Ports Tab and change usb port click Apply and Check test
if CAMEO head works then it is your perfact setting click ok and Cut from Software
if got problem comes then change port againa and check then test again
Now you are ready to cut Mobile and Laptop skin from TIA Creation Software to cut with CAMEO plotter